Spring TX

Vita Dental - Spring TX

Get Directions with Google Maps
Contact Us +1-713-714-4785
Opening Hours :
  • Mon - Fri: 9am to 6pm
  • Sat: 9am-2pm

Types and Components of Dental Implants

150 150 Tony

Types and Components of Dental Implants

Many people desire to always have their natural teeth for as long as they will live.

However, some situations can cause one to lose some of their teeth hence ending up with a gap in the mouth. Therefore, for the gap to be filled, you will need to undergo a dental implant. A dental plant is a process where a mechanical device is used as a substitute to your original tooth. With this artificial dental implanted tooth, your dental formula is restored back, and you live a healthy life as before.

The process of dental implanting, however, requires a team of proficient doctors who are up to the task.

The dental implant process can be done in any of the following types:

Endosteal implants

Endosteal implants are implants where the artificial tooth is implanted directly into the jawbone; the dentist then gives the patient some time for them to go and heal.

The implants in this process are made of titanium. This reduces the effect of oxidation in the mouth. After this specified time, a second surgery is performed to connect a post to the original implant.

Endosteal implants are the most practiced implants in these days.

Subperiosteal implants

In this type of implant, the dental implants are placed above the jawbone or underneath the gums.

A post is attached to a metal frame that is fitted under the gum. When the gum heals, false teeth are placed on the posts that protrude out of the gums.

The process is suitable for patients with weak jawbones that cannot support endosteal implants.

Zygomaticus dental implants

This type is suitable for patients with the poor jawbone and does not prefers endosteal.

Usually, the upper jaw acts as the implant base. With zygomaticus, however, cheekbones are the ones that serve as the base for attaching the implant. Patients who want to have their non-removable full upper implants may also prefer this type

This procedure is very complicated and not many dentists perform it.

Mini dental implants

Also called narrow diameter implants, these implants are smaller compared to commonly known implants. Very tiny bolts are used since the room between roots is usually small.

Blade Form dental implants

Blade form implants were mostly used in the past days.

With them, a channel is created in the bone. An implant is then fitted in the channel and pressed. Pressing the implant into the channel harder helps to offer it more stability.

Mini dentures implants

These are implants performed on patients who have lost all teeth or have lost many teeth in a single jawline.

These implants help to avoid loss of bones that may arise due to the missing of teeth.

The process of dental implants involves components that make it a success. These components include:

A crown, abutment, abutment screw and the implant.

The Crown

A crown is the uppermost part of the tooth that projects from the gum. Crowns are the copy and replicate of the natural tooth.

They come in different shapes, similar to the four types of natural teeth, and providing a biting surface identical to the original teeth.

Crowns have a wide diameter that helps in load distribution during biting. This increase in diameter also provides an increased surface area that provides stability and resistance to stresses.

Crowns are of long lengths to make them stable when drilled into the jawbones. According to Vita Dental Springs, use of shorter implants may be dangerous because occlusal forces must be dissipated over considerable lengths to prevent stress at the top of the crown as too much stress on the crown can cause breaking of the implant.

This crown maybe cemented, clipped, screwed or snapped into place.

The implant abutment

After the crown, another part is the abutment. The abutment is a part that lies above the gumline.

Abutments provide support to the overlying crown and is also an interface between the crown and the root implant. Different manufacturers make preformed abutments of different sizes and shapes.

A torque wrench is used to screw an abutment into the root. Just like the crown, abutments can be made of titanium or alloys of titanium.

The implant root or screw.

An implant root is a part that is embedded into the jawbone. The implant is then screwed together with the jawbone.

This implant root acts as an artificial root to the crown and the abutment.

During the healing process, bone tissues grow around this root. The tissues regenerate with time strengthening the jaw further and reducing the effect of bone loss which occurs when natural teeth are lost.

Implants come in different shapes, lengths, and width. In case you are looking for the best providers of these implants, vita dental springs can be the best place to look for them.

Implant roots are made up of titanium or an alloy of titanium. increase its strength and make it more resistive to forces

Well implanted artificial teeth have the potential of serving you for a lifetime. Vita dental springs offer you with the most common dental implants using high-quality artificial teeth.

Leave a Reply

Your email address will not be published.